Technical Data
Fluid: Compressed air
Maximum pressure:
Transparent bowl: 10 bar (150 psig)
Metal bowl: 17 bar (250 psig)
原裝NORGREN F39-100-M0TGOperating temperature:*
Transparent bowl: -20° to +50°C (0° to +125°F)
Metal bowl: -20° to +65°C (0° to +150°F)
* Air supply must be dry enough to avoid ice formation at temperatures below
+2°C (+35°F)
Particle removal: Down to 0.01 μm
Air quality: Within ISO 8573-1, Class 1 (particulates) and
Class 2 (oil content)
Maximum remaining oil content of air leaving the filter: 0.01ppm at
+21°C (+70°F) with an inlet oil concentration of 17 ppm.
Maximum flow with 6,3 bar (90 psig) inlet pressure ? :
G1/8 ports, 2,8 dm 3 /s (6.0 scfm)
G1/4 ports, 3 dm 3 /s (6.36 scfm)
?
Maximum flow to maintain stated oil removal performance.
Nominal bowl size: 31 ml (1 fluid ounce)
Drain connection: 1/8 " pipe
原裝NORGREN F39-100-M0TGAutomatic drain operation: Spitter type drain operates momentarily
when a rapid change in air flow occurs or when the supply
pressure is reduced.
Materials:
Body: Zinc
Bowl:
Transparent: Polycarbonate
Metal: Zinc
Element: Synthetic fiber and polyurethane foam
Elastomers: Neoprene & nitrile
Ordering Information
See  Ordering Information  on the following
pages.
ISO Symbols
Automatic drain Manual drain
Back to Selector Page
N/AL.8.300.105.02 5/98
Typical Performance Characteristics
F39
Our policy is one of continuous research and development.
We reserve the right to amend, without notice, the specifications given in this document.
Wall Mounting Bracket
and Body Screws
5939-06
Accessories
Saturated Flow* Dry Flow?
Port Size Model Numbers Flow dm 3 /s (scfm)  Flow dm 3 /s (scfm)  Weight kg (lbs)
G1/8 F39-100-A0TG 2,8 (6.0) 5,3 (11.2) 0.13 (0.28)
G1/4 F39-200-A0TG 3,0 (6.4) 5,8 (12.2) 0.13 (0.28)
Ordering Information. Models listed include ISO G threads, automatic drain and transparent bowl.
* Approximate flow at 6,3 bar (90 psig) inlet pressure and 0,3 bar (5 psig) pressure drop.
? Dry flows apply only when all oil, water, and other aerosols are removed.
Alternative Models
3 F 9 # # # #
# -
# #  -
Port Size Substitute
1/8 " 1
1/4 " 2
Threads Substitute
PTF A
ISO Rc taper B
ISO G parallel G
Option Substitute
Not applicable 0
Bowl Substitute
Transparent T
Metal M
Option Substitute
Not applicable 0
Element Substitute
Coalescing 0
Drain Substitute
Automatic A
Manual M
Constant bleed B
INLET PRESSURE MAXIMUM FLOW ?
bar (psig) dm 3 /s (scfm)
1 (15) 1,2 (2.5)
3 (45) 2,0 (4.2)
5 (70) 2,7 (5.7)
6,3 (90) 3,0 (6.4)
7 (100) 3,1 (6.6)
9 (130) 3,6 (7.6)
? Maximum flow to maintain stated oil removal performance.
4 (0.157) Dia **
13 (0.5) Deep **
Automatic Drain Manual Drain
37 (1.45)
23
(0.91)
19
(0.73)
23
(0.91)
154 (6.07) *
10 (0.38)
104 (4.10)
158 (6.22) *
10 (0.38)
108 (4.25)
42 (1.63)
Constant Bleed Drain
(Transparent Bowl)
135 (5.32) *
10 (0.38)
92 (3.62)
? 6 (0.24)
Constant Bleed Drain
(Metal Bowl)
136 (5.32) *
10 (0.38)
93 (3.66)
? 6 (0.24)
5/98 N/AL.8.300.105.03
Dimensions mm (inches)
F39
Our policy is one of continuous research and development.
We reserve the right to amend, without notice, the specifications given in this document.
Bracket Mounting
Use 1/8 " (3 mm) screws to mount bracket to wall.
* Minimum clearance to remove bowl.
** Mounting holes.
34 (1.34)
52 (2.06) 35 (1.39)
6 (0.22)
43 (1.71)
38 (1.50)
24
(0.93)
7 (0.29)
Service Kits
Item Type Part number
Service kit All models 4141-10
Replacement drains
Manual 773-03
Automatic 3654-02