- 球形濃縮器概述
1.Description for the Spherical concentrator
球形濃縮器主要由濃縮罐主體、冷凝器、汽液分離器、受液罐等主要部分組成,具有操作方便、使用可靠,對生產環境無污染、噪音小等特點,廣泛適用于制藥、食品、化工等行業對液體物料的濃縮、蒸餾及有機溶媒的回收工藝。設備與物料接觸部分均采用不銹鋼制造,具有良好的耐腐蝕性能,經久耐用并符合GMP標準。
The spherical concentrator mainly by the concentration of the main tank, condenser, separator, the main part of the liquid tank and other components, has the advantages of convenient operation, reliable use, no pollution, low noise and so on the production environment, the recovery process is widely used in pharmaceutical, food and chemical industry concentration, liquid material of distillation and organic solvent. The contact parts of the equipment and materials are made of stainless steel, which has good corrosion resistance, durability and meets the GMP standard.
- 結構特點及操作方法
2. Model & Instruction
設備的濃縮罐為夾套結構冷,凝器為列管式,汽液分離器為折流分離式、冷卻器為蛇管式結構。工作時打開的真空口和進料口閥門,將液料抽入罐內,當液面達到一定高度后,關閉進料閥,并緩緩開放蒸汽進口閥門,將罐內液體的沸騰數分鐘后,注意保持蒸汽壓力和真空度(或者調節設定溫控儀的進行自動控制)。蒸餾出的汽體通過冷凝器、汽液分離器,其中部分回流至主體罐內,大部分進入冷凝器冷凝成液體進入受料罐進行回收或排放。濃縮結束后,關閉真空口,蒸汽口閥門,打開放空口(即直嘴式旋塞閥)常壓后出料。由于是真空蒸發液料沸點相應較低,因而液料蒸發的速度也比較快,根據液料的熱敏特性,操作時可以自行調節真空度與溫度的高低,使設備與物料蒸發工作達到一個*的狀況。
Spherical concentrator equipment for concentrating tank jacket structure cooling condenser is tubular and the vapor liquid separator, cooler pipe structure for snake baffle. When the open spherical concentrator vacuum port and inlet valve, the liquid is pumped into the tank, when the liquid level reaches a certain height, close the inlet valve, and slowly open the steam inlet valve, the liquid in the tank boiling after a few minutes, keep the steam pressure and vacuum (or automatic control regulation set the temperature control instrument). The distillation steam body passes through the condenser and the steam liquid separator, wherein, part of the steam is returned to the main tank, and most of the steam enters the condenser and condenses into liquid, and then enters the receiving tank for recycling or discharge. Concentrated after closing the vacuum valve, steam, open the vent (i.e. straight mouth plug valve) after discharge at atmospheric pressure. Because the vacuum evaporation of liquid material boiling point is relatively low, so the evaporation of the liquid material is also relatively fast speed, according to the thermal characteristics of the liquid material, when the operation can adjust the vacuum and temperature, the evaporation of materials equipment and work to achieve an optimal condition.
- 技術參數
3. Parameter
產品型號/ Model | QN250 | QN500 | QN1000 |
設備容積(I)/ Capacity | 250 | 500 | 1000 |
夾套內工作壓力(MPa)/Pressure in jacket | 0.15 | 0.15 | 0.15 |
允許真空度(KPa)/ Vacuum degree | 60 | 60 | 60 |
蒸發能力(Kg/h)/ Evaporation Capacity | 75 | 120 | 195 |
冷凝面積(m2)/ Condenser area | 1.8 | 3.0 | 4.0 |
設備重量(Kg) / Weight | 320 | 450 | 950 |
外形尺寸/Size (mm) | 1900×1100×2300 | 2100×1200×2500 | 2350×1520×2765 |