板式滅菌機

一、產品概述：

板式殺菌機組是采用新型高效BR、BP型板片為換熱主機，物料和過熱蒸汽（或過熱水）在機器內的非接觸性熱交換，使流體物料在較短時間在同一機組內達到要求的殺菌溫度、保溫、熱回收與冷卻等工藝要求，具有結構緊湊、性能穩定、易于清洗、傳熱效果好、效率高、能耗低，是乳品、豆奶、果汁飲料、糖漿、醬油、酒類、醋類、藥液等液態物料的理想滅菌設備。

• 工作原理：

    殺菌機利用高精度可控溫度的熱水或蒸汽對物料進行加熱殺菌，物料由前工序進入平衡罐，經進料泵輸入到換熱器內，在預熱部分與殺過菌的熱物料進行換熱后使冷物料溫度升到預定值，然后通過由熱水或蒸汽非接觸間接加熱到工藝所需的溫度，并在保溫管中維持所要求的一段時間，從保溫管進入預熱段機內與冷物料交換進行熱回收，zui后進入冷卻段冷卻到工藝所需的溫度出料，冷卻段可分為冷卻水冷卻與冰水冷卻，整個過程均在封閉狀態下進行，以保證物料不受二次污染的生物穩定性目的。整套機組可根據用戶的不同要求對物料加熱、保溫、殺菌冷卻的不同工藝要求進行特定的組合系統設計，以滿足各類工藝要求。

• 設備組成及特點：

殺菌機組主要由板式換熱主機、物料平衡罐及物料管路、熱水罐及熱水（蒸汽）管路、物料泵、熱水泵、清洗泵、控制柜及電器元件等組成。

1. 物料和加熱介質均在各自的密封系統中通過非接觸性熱交換實現加熱，確保物料衛生安全；

2. 殺菌時間短，可確保物料的營養成份不被破壞；

3. 整機全部采用食品級不銹鋼材料，確保達到國家對飲料食品設備安全衛生指標要求；

4. 傳熱效果好，熱回收率高，耗能少；

5. 主要控制元件、閥件及配套件均選用進口件，使用壽命長；

6. 采用PLC控制，可對物料各段的加熱溫度、熱水溫度、蒸汽流量調節等實行自動控制，并設有物料自動回流系統，確保物料*達到滅菌效果；

7. 結構簡單，易于清洗，操作方便，維修費用低。

四、設備基本參數：

Plate Type Sterilizer

I. Product Introduction

Plate type sterilizer adopt modern engineering widely used are high efficient BR,BP plate heat exchanger,it will heat the fluid to required sterilization temperature in a short time through non-touch heat exchange by liquid to steam or hot water.It is the ideal sterilization equipment for fluid beverage such as milk,fruit juice,vegetable juice etc.

Plate sterilizer is for fluid beverage food aseptic hot treatment,product enter into the heat exchanger from balance tank because of high precision water temperature difference,cold product will reach set index value after heat exchange between heating part and sterilized material, and then reach 120℃ indirectly by the water heated by  steam, material will have high temperature sterilization in the pipeline for keeping the required temperature in a short time,the material will heat exchange with coming cold material after discharge out from the insulation pipeline, finally cooling to the required discharge temperature at cooling stage, this whole processing is running under seal, make sure material operation stable.

It is available for processing system designed with different process based on user’s requirement on the heating,insulation,sterilization,cooling stage.

This equipment consist of material balance and transfer system,plate type heat exchange system,material pipeline system,hot water pipeline system,steam pipeline system,hot water heating system,material automatic back flow system,temperature auto control and electric control system etc.

II.Equipment Characteristic

1. Material and heating medium having non-touch heat exchange under compley seal system, make sure it is sanitary and safety.
2. Short for sterilization,ensure nutrition ingredient without broken.
3. Whole machine adopt food level stainless steel material,ensure it reach native beverage food equipment safety sanitary index requirement.
4. Good heat exchange,hot recycle efficiency is high,low consumption
5. Main control element,valves and spare part are imported, longer life time.
6. Adopt PLC control for each heating temperature,how water temperature,steam flow rate control etc, and equipped with material auto back flow system, make sure material is * sterilization well.
7. Easy construction,easy to clean,operation convenient,low cost maintain.