硫酸鈉濕料流化床干燥器
Equipment Specification
設備技術要求textMoisture content of product discharge is ≤0.1%.
產品出料含水率≤0.1%。
Service description
服務描述textDrying of Sodium sulfate cake in Fluidized bed dryer.
在流化床干燥器中干燥硫酸鈉濕料
Type
類型textFluidized bed drying
流化床干燥
Method of operation
操作方式textContinuous
連續操作
Location - inside / outside
安裝位置-室內/室外textIntside
室內
Ambient temperature
環境溫度textRefer Site Data and Project Requirements Specification.
Expected materials of construction - product contact parts
預期制造材料-產品接觸件text304 Stainless Steel
304不銹鋼
Expected materials of construction - other
其他主要部件的生產材料text304 Stainless Steel
304不銹鋼
Drying temperature
干燥溫度°C建議~145
Bed board area
床板面積 ㎡建議＞9
Feed Analysis進料分析
Description
描述textsodium sulphate
硫酸鈉
Feed - average
平均進料量t/h6
Feed - maximum (design)
設計進料量t/h8
Feed moisture content
進料含水量% w/w5
Feed Temperature
進料溫度°C90
Discharge Analysis出料分析
Discharge moisture content
出料含水量% w/w≤0.1
Discharge Temperature
出料溫度°C≤40
Bulk density
堆積密度T/m31.5
Utilities公用條件
Steam temperature
蒸汽溫度°C175 (Contractor to confirm minimum requirement)
175(供應商確認要求)
Steam pressure
蒸汽壓力kPa.a1000 (Contractor to confirm minimum requirement)
1000 (供應商確認要求)
Dry air inlet temperature
干燥空氣進風溫度°C150(Contractor to confirm)
150 (供應商確認要求)
Plant/Instrument air pressure
工廠/儀表氣壓力kPa.g600 (Contractor to confirm)
600 (供應商確認要求)
供貨范圍
供貨范圍text流化床、振動篩、布袋除塵、旋風分離器、空氣加熱器、鼓風機、引風機、相關PLC自控系統等
