小型噴霧干燥技術參數:
1、實驗室小型噴霧干燥機全自動控制與手動控制雙重控制模式，整個實驗過程彩色觸摸屏動態顯示（動畫）
2、進風溫度控制：30℃～300℃
3、出風溫度控制：30℃～140℃
4、蒸發水量：1500mL/H～2000ml/h
5、zui大進料量：蠕動泵可調zui大為2000ml/h
6、zui小進料量：50mL
7、可升級成雙級分離收集系統
8、實時調控PID恒溫控制技術，加熱控溫精度：±1℃
9、干燥時間：1.0～1.5S
10、具有關機保護功能：關機時只需按停止鍵，機器除風機外立即停止運行，保證設備不會因?yàn)檎`操作（強行關風機）而導致加熱部分燒壞。
11、彩色LCD觸摸屏參數顯示：進風口溫度/出風口溫度/蠕動泵轉速/風量/通針頻率
12、噴嘴口徑：0.5mm/0.7mm/0.75mm/1.0mm/1.5mm/2.0mm可選，并可根據要求定制
13、設有噴咀清潔器（通針），在噴咀被堵塞時，會自動清除，通針的頻率可自動調整
14、噴霧干燥機整機全不銹鋼制作,二流體噴霧的霧化結構，噴霧、烘干及收集系統采用透明的優質高硼硅耐熱玻璃材料制造
15、內置進口全無油空壓機，噴粉的顆徑呈正態分布，流動性好，而且噪音非常低，符合國家實驗室噪音標準；
16、整機功率：3KW/220V
17、塔壁吹掃裝置，物料得率更高
18、噴霧頭冷卻裝置（可選）
19、可直接升級成應用于有機溶劑物料干燥的氮?dú)庋h(huán)系統
20、設備尺寸：1200mm(高）*650mm（長）*500mm（寬）

上海旌派儀器有限公司
Jipad品牌小型噴霧干燥機*?。?！
旌派承諾Jipad品牌小型噴霧干燥機質保兩年,終身維護?。。?br>歡迎您的選購?。?！

Mini spray dryer technology parameters:
1, laboratory spray dryer automatic control and manual control of the dual control mode, the whole experiment process color touch screen dynamic display (animation)
2, air inlet temperature control: 30 to 300 DEG C
3, out of the wind temperature control: 30 to 140 DEG C
4, water evaporation: 1500mL/H ~ 2000ml/h
5, the maximum feed rate: adjustable peristaltic pump maximum 2000ml/h
6, the minimum feed rate: 50mL
7, can be upgraded into double stage separation collection system
8, real time control of PID temperature control technology, heating temperature control precision: - 1 DEG C
9, the drying time: 1 ~ 1.5S
10, with the shutdown protection function: shutdown just press the stop button, the machine in addition to the wind outside the machine immediay stop operation, ensure the equipment will not be because of misoperation (forcibly closed fan) and lead to burn out heating part.
11, color LCD touch screen display of parameters: the air inlet / outlet temperature temperature / peristaltic pump speed / wind / needle frequency
12 and the nozzle diameter: 0.5mm/0.7mm/0.75mm/1.0mm/1.5mm/2.0mm is optional, and can be customized according to customer requirements
13, a nozzle cleaner (needle), is blocked at the nozzle, will be automatically cleared, needle frequency can be adjusted automatically
14, spray dryer machine all stainless steel atomizing structure of two fluid spray, spraying, drying and collecting system made of transparent high heat-resistant borosilicate glass material
Built in 15, imports of oil free air compressor, powder particle size showed normal distribution, good fluidity, and the noise is very low, consistent with national standards laboratory noise;
16, the complete machine power: 3KW/220V
17, the tower wall cleaning device, the material yield higher
18, the spray head cooling device (optional)
19, can be directly upgraded to be used in organic solvent material dry nitrogen cycle system
20, the size of the equipment: 1200mm (high) *650mm (L) *500mm (W)

小型噴霧干燥機產品說明:
Jipad-2000ML實驗室小型噴霧干燥機主要適用于高校、研究所和食品醫藥化工企業實驗室生產微量顆粒粉末，對所有溶液如乳濁液、懸浮液具有廣譜適用性,適用于對熱敏感性物的干燥如生物制品、生物農藥、酶制劑等，因所噴出的物料只是在噴成霧狀大小顆粒時才受到高溫，故只是瞬間受熱，能保持這些活性材料在干燥后仍維持其活性成份不受破壞。

Mini spray dryer product description:
Jipad-2000ML laboratory spray dryer is mainly suitable for colleges and universities, research institutes and pharmaceutical and chemical enterprises producing food laboratory trace particle powder for all solution, emulsion, suspension has broad applicability, suitable for heat sensitive materials dry as biological products, biological pesticide, enzyme preparations, high temperature is only because of the sprayed material just in a fog shape size particles in the spray, so just an instant heating, can keep the active material is not damaged after drying and still maintain its active ingredients.

小型噴霧干燥機產品特征：
1、采用彩色大觸摸屏操作，全自動控制和手動控制相結合，國內*：
2、全自動控制：一鍵式開機，設定噴霧工藝參數后，溫度到達預定溫度，蠕動泵自行啟動，觸摸屏上顯示運行動畫，運行流程清晰顯示；關機時只需按停止鍵，機器自動安全關機。
3、手動控制：如需在實驗過程對工藝參數進行調整，可方便切換至手動狀態，整個實驗過程彩色觸摸屏動態顯示（動畫）。
4、關機保護功能：關機時只需按停止鍵，機器除風機外立即停止運行，保證設備不會因?yàn)檎`操作（強行關風機）而導致加熱部分燒壞。
5、噴霧、烘干及收集系統采用透明的優質高硼硅耐熱玻璃材料制造，使得噴霧干燥過程在無污染及zui穩定的環境下進行，且使整個噴霧干燥實驗進程可直接觀察，為科研人員掌控實驗進程及實驗結果提供了*的便利,并能及時發現解決問題。所有玻璃元件易拆卸，易清洗。
6、內置進口全無油空壓機，噴粉的顆徑呈正態分布，流動性非常好，而且噪音非常低，小于60db，符合國家實驗室噪音標準；
7、二流體噴霧的霧化結構，整機采用優質不銹鋼材料精密制造，設計緊湊，無需附屬設備，方便使用，歷久如新。
8、為了滿足用戶在實驗范圍調節各項參數的要求，在干燥溫度控制的設計上采用實時調控PID恒溫控制技術，使全溫區控溫準確，加熱控溫精度±1℃。
9、為了保持樣品的純凈，配備了進風口過濾器。
10、進料量可通過進料蠕動泵調節，zui小樣品量可達50ml。磁力攪拌器可選
11、干燥后的成品干粉，其顆粒度較均勻，95%以上的干粉在同一顆粒度范圍。
12、實驗室小型噴霧干燥機針對黏性物料，設有噴咀清潔器（通針），在噴咀被堵塞時，會自動清除，通針的頻率可自動調整；
13、創新的塔壁吹掃裝置，物料回收率更高。

上海旌派儀器有限公司
Jipad品牌小型噴霧干燥機*?。?！
旌派承諾Jipad品牌小型噴霧干燥機質保兩年,終身維護！?。?br>歡迎您的選購?。?！

Mini spray dryer product features:
1, using large color touch screen operation, automatic control and manual control of a combination, the only domestic:
2, full automatic control: one key start, set the spray process parameters, temperature reaches the preset temperature, the peristaltic pump to start, to touch the running animation display screen, the operation process clearly display; shutdown just press the stop button, the machine automatically safe shutdown.
3, the manual control: such as the need to adjust the process parameters in the experimental process, can easily switch to manual state, the whole experiment process color touch screen dynamic display (animation).
4, shutdown protection function: shutdown just press the stop button, the machine in addition to the wind outside the machine immediay stop operation, ensure the equipment will not be because of misoperation (forcibly shut the fan) and lead to burn out heating part.
5, spraying, drying and collecting system made of transparent high heat-resistant borosilicate glass material, makes the spray drying process in no pollution and the most stable environment, and make the whole spray drying experiment process can be directly observed, the experimental process and the experimental results have provided great convenience for scientific research personnel control, and timely find and solve problems. All glass element of easy disassembly, easy cleaning.
Built in 6, imports of oil free air compressor, powder particle size showed normal distribution, liquidity is very good, and the noise is very low, less than 60dB, consistent with the noise standard of national laboratory;
Atomizing structure 7, two fluid spray, the machine adopts precision manufacturing, high-quality stainless steel materials has the advantages of compact design, no need of auxiliary equipment, easy to use, as good as new.
8, in order to satisfy the user adjust the parameters in the experimental range requirements, using the real-time regulation of PID temperature control technology in the design of drying temperature control, make full temperature range accurate temperature control, heating temperature control precision is + - 1 DEG C.
9, in order to maintain the purity of the sample, is equipped with air inlet filter.
10, the feed amount can be through the feeding peristaltic pump regulator, minimal sample volume up to 50ml. Optional magnetic stirrer
Finished powder 11, after drying, the granularity is more uniform and more than 95% of the dry powder in the same particle size range.
12, small laboratory spray dryer for viscous material, is provided with a nozzle cleaner (needle), is blocked at the nozzle, will be automatically cleared, needle frequency can be adjusted automatically;
The tower wall 13, innovation of the blowing device, the material recovery rate is higher.